Fittings

Quick-connect wands without the wrong thread.

Tips are almost always 1/4″ QC. The gun is often M22. Those are not the same hole. Measure once, order once, stop leaking all Saturday.

The fittings you will actually meet

Ignore the marketing names on the box. There are four faces that show up in a garage, and mixing them is how you buy three adapters.

Fitting Where it lives How you tell What to do
1/4″ QC Tip end of almost every aftermarket wand Spring collar clicks onto a male plug Buy color tips and cannons in 1/4″ QC. You are done.
M22-14 Many electric guns (Greenworks, Sun Joe cousins) ~22 mm thread; 14 mm sealing seat inside Need an M22-14 → 1/4″ QC adapter before any color tip fits.
M22-15 Other electrics and some imports Same outside thread; 15 mm seat. The 14 mm adapter will leak. Buy a kit that includes both seats, or measure the seat.
M22 on gas guns Hose-to-gun on a lot of homeowner gas machines Short hose, threaded gun, wand often already QC at the tip Do not assume the gun face is 1/4″ QC. Check both ends.

How to tell what you have

  1. Look at the tip end of the wand. A spring collar that clicks onto a plug is 1/4″ QC. You are done at that end.
  2. If the tip screws on with threads, measure the thread diameter. ~22 mm across is M22.
  3. M22-14 vs M22-15: the inside sealing seat differs. “M22 adapter kit” bundles exist because of this.
  4. Never force brass onto the wrong pitch. Cross-threading a gun is a $80 Saturday.
14 vs 15 without a caliper: if a “universal M22” adapter seats and still weeps at the face, you have the other seat. Swap the included 14/15 puck before you buy a second gun.

Electric vs gas — a short map

  • Electric compact: threaded gun is the usual trap. Budget an M22 (14 and 15) to 1/4″ QC kit before you buy color tips or a cannon.
  • Homeowner gas: wand tip is often already QC. Confirm PSI rating on any replacement wand — it must meet or beat the stamped pump number.
  • Surface cleaner: most 15–16″ decks want 1/4″ QC in. Wrong coupler, no spin. See the deck matrix.

Wand length and rating

Length is reach and fatigue, not cleaning power. The wand and gun must be rated at or above your machine’s PSI. Stainless lasts; aluminum is fine if you do not lever it like a pry bar.

Length Job Note
12–20″ Cars, furniture, stairs Nimble. You will wear your back less on vertical work.
28–36″ Driveways, patios, house skirt Keeps overspray off your shins. Default for concrete.
48″+ Second-story rinse, tall fences Leverage is a liability. Stainless, two hands, no pry-bar moves.
Keep spare O-rings. QC leaks are almost always a dry or nicked ring, not a doomed coupler.

A sane adapter kit

  • M22 (14 and 15) to 1/4″ QC female — so any color tip fits an electric gun.
  • Two extra 1/4″ QC couplers and plugs.
  • A short whip hose if your stock gun-to-wand joint weeps.

Building a driveway stack? The concrete kit already assumes 1/4″ QC at the tip. Size the hole on the orifice chart before you order another color. Washing the car on that gun? A 12–20″ wand, and the paint-safe sequence is how to pressure wash a car.

Picks that match this path

Live Amazon links with our Associates tag. No invented prices.

Simpson 3600 PSI 1/4" Quick Connect Pressure Washer Nozzle Set, 5-Pk, 80145 | 5 Spray Patterns (0°, 15°, 25°, 40°, Soap) In One Set, Hot Water Capable Up To 212°F, Use W/ Gas & Electric Pressure Washers

Tip set

Simpson Cleaning 80145 3600 PSI Universal Pressure Washer Nozzles, Set of 5

1/4″ QC, 3.0 orifice, 0/15/25/40/soap. Size the hole on the chart first.

M MINGLE Pressure Washer Adapter Set, Quick Connect Gun to Wand, M22 14mm to 1/4 Inch

Electric-gun adapter

M MINGLE Pressure Washer Adapter Set, Quick Connect Gun to Wand, M22 14mm to 1/4 Inch

This listing is the 14 mm seat. 14 mm is not 15 mm — if it weeps at the face, you have the other seat. Do not force it.

Essential Washer Pressure Washer Wand Extension | 20" Curved Stainless Steel With Molded Grip | 4000 PSI

Extension wand

Essential Washer 20″ pressure washer extension wand

Reach without standing on the flower bed. Confirm the PSI rating.

Tool Daily Gutter Cleaner Attachment for Pressure Washer, 2 Turbo Nozzle | Rotating Power Washer Turbo Nozzle for Gutter Cleaning, 1/4 Inch Quick Connect, 3300 PSI

Gutter reach

Tool Daily Gutter Cleaner Attachment for Pressure Washer, 2 Turbo Nozzle

Second-story rinse only if the wand and gun meet your stamped PSI.

Spares

1/4″ QC coupler + plug set

No assigned ASIN — tagged search. Keep spare O-rings.

Charts first

PSI and GPM before a cart

Orifice, deck size, and fittings are the product. Shopping links come after the numbers.

Not a shop

No inventory. No checkout.

We publish matching logic. We do not stock machines, take payments, or pretend to be a storefront.

Associates publisher

Disclosure stays visible

Amazon links use tag nozzlekit-20 and may earn a commission. Nothing is dressed up as “Buy now.”